GE Omnibed Monitor System: October 2017

Monday, 30 October 2017

Agilent Fieldfox N9912A RF Analyzer

Welcome to a Biomedical Battery specialist of the Agilent Battery

FieldFox RF analyzers with battery such as Agilent E6000A E6000B E6000C Adapter, Agilent N9915A Battery, Agilent N9916A Battery, Agilent N9917A Battery, Agilent N9927A Battery, Agilent N9937A Battery, Anritsu MT9082A2 Battery, Anritsu MT9082A8 Battery, Anritsu MT9082C9 Battery, Anritsu MT9082A2 Battery, Anritsu MT9080 Battery, Fluke 435 Battery are designed to withstand your toughest working conditions. To accelerate your work, each operating mode has a task-driven user interface that saves time in the field. Step up to FieldFox – and boost your readiness.

The N9912A’s base function is a cable and antenna analyzer and it can be configured to include a spectrum and transmission/reflection 1-port vector, 2-port scalar network analyzer.

Cable and antenna analyzer
Fifty to sixty percent of cell site problems are caused by faulty cables, connectors, and antennas. Degraded feed lines cause poor coverage, unnecessary handovers, paging failures, and access failures on uplink. To avoid service quality problems, it is critical to keep cell sites’ cable and antenna systems in good condition.

Use FieldFox to make return loss, VSWR, insertion loss/transmission, one-port cable loss, and distance-to-fault (DTF) measurements. You can test antennas, cables, ilters, and ampliiers with a single instrument.

Return loss and DTF measurements
FieldFox can make both return loss and distance-to-fault measurements at the same time. This helps you correlate overall system degradation with speciic faults in the cable and antenna system.

The built-in cable editor allows you to edit existing cable types on-site, and save them as new cable types with user deined names.

Measurements in the ?eld without the need to manually calibrate
Each instrument is CalReady at the RF Out port, immediately following power-on or preset. This means Qit’s already calibrated and ready to make measurements such as one port cable loss, VSWR, return loss, and DTF measurements at the test port.

Field strength measurements
Field strength characterization is a common test performed by operators in the field. To make accurate measurements, the gain and loss of the antenna and cables need to be accounted for. With FieldFox, antenna factors and cable loss data can be loaded using either the front panel or the Data Link software.

Limit lines simplify testing
Limit lines or masks can be used for quick pass/fail testing of devices or frequency spectrums. FieldFox allows you to deine fixed and relative limit lines, for both the RF spectrum traces and S-parameters. Additionally, with a single key press, you can build a limit line table from a current trace, and add offsets or margins to simplify your testing process.

Agilent N3900A Modular Network Tester

Welcome to a Biomedical Battery specialist of the Agilent Battery

The Agilent N3900A Modular Network Tester is a portable, lightweight, rugged test platform for the installation, commissioning and maintenance of optical networks. Developed from customer feedback from installation and maintenance (I&M) technicians worldwide, its modular design delivers the measurements you need, when you need them. Snap-on measurement modules meet your test requirements for today’s communications networks; the modular platform protects your investment, and lets you grow into your future measurement needs.

The Modular Network Tester with battery like Agilent N9330 Battery, Agilent N9330B Battery, Fluke BP7235 Battery, Fluke 744 Calibrator Battery, Fluke DSP-4000PL Battery, Mindray T1 Battery, Philips A3 Battery, Philips Suresign VS2 Battery, Philips Suresign VS3 Battery, Philips Suresign VM4 Battery, Philips Suresign VM6 Battery, Philips Suresign VM8 Battery can hold up to three modules to perform OTDR measurements, chromatic dispsersion, polarization mode dispersion or optical spectrum analysis, or a 1x12 Optical Switch module. A video microscope camera can be connected to ensure clean, fast and safe connector inspection as the connector surface picture can be analyzed on the 10.4” display. From the carrying case to the handles and tilt-stand, from the pop-up connector to your choice of interface, attention to detail and to your feedback provide the perfect fit for the way you work.

The Modular Network Tester is powered by a 64Bit RISC® processor architecture with a real-time operating system, VXWorks®, for mission critical operations. Each test engine has its own RISC processing power for ultra fast data acquisition and high accuracy post processing. The Modular Network Tester boots in one minute and all the modules can be hot-swapped – so it’s always ready to work when you are.

Ergonomic design The Modular Network Tester feels like an extension to your arm. It has a hand strap, an ergo grip, and a shoulder strap to work with you and keep your hands free. Attaching a fiber optic connector to a test engine has never been so safe and fast. The pop-up connector can be raised for connection and cleaning purposes and sits securely in the down position, protected by a dust cover while in transit.

The video microscope protects your eyes and speeds up your fiber optic connector cleaning procedures. Flash-card data storage is rugged and secure – there is no internal hard drive to crash. The Toolkit companion software, Toolkit III, prepares acceptance reports the way your customers want them and handles post-processing jobs to free you up for the next task.

Sunday, 29 October 2017

Anritsu S113 Cable Antenna Analyzer

Welcome to a Biomedical Battery specialist of the Anritsu Battery

The Site Master S113, with a frequency range of 5 to 1200 MHz, is a hand held SWR/RL(standing wave ratio/return loss) and Distance-To-Fault measurement instrument that includes a built-in synthesized signal source and an optional power monitor. It uses a keypad to enter data and a liquid crystal display (LCD) to provide a graphical indication of SWR or RL over the selected frequency range. The Site Master S113 has a built-in distanceto- fault capability. The Site Master S112, as well as model S113 with battery like Anritsu MS2028B Battery, Anritsu MS2027C Battery, Anritsu MS2035B Battery, Anritsu S361E Battery, Anritsu S332E Battery, Anritsu S362E Battery, Anritsu S412E Battery, Anritsu S113B Battery, Anritsu S114C Battery, Anritsu S251B Battery, Anritsu S251C Battery, Anritsu S311D Battery, allows measurement data to be converted to Fault Location via the companion Software Tools program. The Site Master is capable of up to two hours of continuous operation from a fully charged internal battery. It can also be operated from a 12.5 dc source (which will also simulta neously charge the battery). Built-in energy conservation features can be used to extend battery life over an eight-hour work day.

The Site Master is designed for measuring SWR, return loss, or cable insertion loss and locating faulty RF components in antenna systems. Power monitoring capability is available as an option. The displayed trace can be scaled and/or enhanced with settable frequency markers and/or a limit line. A menu option provides for an audible “beep” when the limit value is exceeded. To permit use in low-light environments, the LCD can be back lit using a front panel key.

A PC based software program (called Software Tools) provides an online database record for storing measurement data. Site Master Software Tools can also convert the Site Master display to a Microsoft Windows 3.x graphic. Measurements stored in the Site Master internal memory are down-loaded to the PC using the included serial cable. This null-modem serial cable connects between the Serial Interface connector on the Site Master and a Com Port on a DOS/Windowsbased PC. Once stored, the graphic trace can then be displayed, scaled, and/or enhanced with markers and limit lines. Historical graphs can be overlaid with current data by using the PC’s mouse in “drag-n-drop” fashion. The underlying data can be extracted and used in spreadsheets or for other analytical tasks.

The Software Tools program also performs DTF (Distance To Fault) or Fault Location by clicking on the appropriate icon.

Anritsu S332C Cable Antenna Analyzer

Welcome to a Biomedical Battery specialist of the Anritsu Battery

Covering the 25 MHz to 4000 MHz frequency band, the Site Master S332C site management tool is designed to accurately locate and identify RF cable feed-line and antenna system faults. These models are ideally suited for any experience level user in commissioning and maintenance of today's wire less systems infrastructures including VHF, broadcasting, paging, cellular, PCS/GSM, ISM, and WLL applications. Both S331C and S332C replace all S300 and S400 Series Site Master models.

The S332C features spectrum analysis capability in addition to return loss/SWR, cable loss and distance-to-fault measurements, allowing field engineers and technicians the ability to easily identify and solve RF system problems such as coverage, interference, and other path related signal problems. S332C spectrum analysis with battery such as Anritsu MS2721A Battery, Anritsu MS2724B Battery, Anritsu MS2722C Battery, Anritsu MS2726C Battery, Anritsu MS2711E Battery, Anritsu MS2712EC Battery, Anritsu MT8212E Battery, Anritsu MS2024A Battery, Anritsu MS2026A Battery, Anritsu MS2036A Battery, Anritsu MS2025B Battery, Anritsu MS2026B Battery ranges from 100 kHz to 3 G Hz.

The S332C models include data analysis software, soft carrying case, rechargeable/field-replaceable battery, AC/DC power supply, 12.5V automobile cigarette lighter adapter and users guide.

Specifications
Frequency range 25 to 4,000 MHz
Measures return loss, SWR, cable loss, and distance to fault
Integral synthesized signal generator
Return loss range 0.00
Distance to fault range 1000 m.
Insertion loss range -120.00 to +100 dB
Cable loss range (one port) 0.00 to 20.00 dB
Type n(f) port.
RS232 interface for printer or PC
Analysis software discs included containing distance to fault and Smith chart tools
Lightweight at only 1.36kg - 2.14kg
Alphanumeric Labeling of Saved Measurements
Automatic Time and Date Stamp of Saved Data
Rechargeable, Field Replaceable Battery
RS232 Interface

Tuesday, 24 October 2017

Fukuda Denshi FFcardio UF-750XT

Welcome to a Biomedical Battery specialist of the Fukuda Battery

The Fukuda Denshi FFcardio UF-750XT is a lightweight, highly portable ultrasound system designed for imaging wherever you are, and whenever you want.

Some of the advanced imaging features of this system include color and power Doppler and F-XT image processing technology with battery like Fukuda FX-2201 Battery, Fukuda FX-3010 Battery, Fukuda FX-4010 Battery, Fukuda FX-7000 Battery, Fukuda FX-7201 Battery, Fukuda FX-7202 Battery, Fukuda FX-7302 Battery, Fukuda FX-7402 Battery, Fukuda HHR-13F8G1 Battery, Fukuda HHR-19AL24G1FD Battery, Fukuda LS1506 Battery, Fukuda LS1610 Battery, a high-resolution SVGA screen, and DICOM compatibility and image storage. This ultrasound is also fully controlled by software for accurate and easy use.

Additionally, the cine memory of the Fukuda Denshi ultrasound is very impressive at 128 frames.

Product features:

•Fully software controlled Image Processing (F-XT technology)
•Color Doppler & Power Doppler display available
•Autofocus function for transmission
•High-resolution SVGA display
•Cine memory with 128 frames
•Wide band Probe for multi frequency function
•6-step STC adjustment
•DICOM-compatible Ethernet port
•3.5-inch 640MB drive for image filing

Fukuda Denshi UF-850XTD Review

Welcome to a Biomedical Battery specialist of the Fukuda Battery

The Fukuda Denshi UF-850XTD ultrasound is a fully digital, multi-function system that is more powerful, more flexible, more reliable, and delivers more performance than comparable systems.

To provide the best images, the UF-850XTD ultrasound with battery such as Fukuda 8-HRAAFD Battery, Fukuda 8/HRY-4/3AFD Battery, Fukuda 8TH-2400A-2LW Battery, Fukuda CardiMax FX-3010 Battery, Fukuda Cardimax FX-7100 Battery, Fukuda Cardimax FX-7102 Battery, Fukuda Cardimax FX-7402 Battery, Fukuda FCP-2155 Battery, Fukuda FCP-4610 Battery, Fukuda FCP-7101 Battery, Fukuda FC-1760 Battery, Fukuda FX-2111 Battery includes a variety of useful imaging technologies, such as:
•Fully digital beamformer
•Multi-beam processing
•Advanced F-XTD imaging technology

These technologies aim to dramatically enhance the Fukuda Denshi UF-850XTD ultrasound’s image quality and efficiency, especially for clinical applications such as abdominal, OB/GYN, cardiac, vascular, musculoskeletal, pediatrics, neonatal, vet, and others.

Furthermore, the UF-850XTD ultrasound is compatible with many upgradeable features, it has a space-saving compact body, and it features effective data management tools and operability.

Product features:
•Full Digital Beam Former
•Digital Image workstation
•Advanced F-XTD Imaging Technology
•Multi Beam Processing
•Active 3 probe ports
•High Density and Wide Band Probes
•Quick Boot up Time
•Wide Flat Panel Display
•Multiple Tissue Harmonic Imaging
•Triplex Display Mode
•High frequency Imaging up to 14MHz
•User-friendly Interface

Monday, 23 October 2017

GE Panda iRes Infant Warmer

Welcome to a Biomedical Battery specialist of the GE Battery

The Panda Warmer makes your job easier by helping keep healthy babies healthy. An innovative recessed heater design lets you see and access your patients, and it keeps patients warm and content while keeping you cool and comfortable.

Product Features

•Direct the heat to the infant, and not the caregiver - Stop worrying about a clumsy overhead heater. Our design allows you to stay cool and comfortable (without having to duck under a heating element).

•With battery such as GE DASH2000 Battery, GE DASH 3000 Battery, GE DASH 2000 Battery, GE DASH 4000 Battery, GE DASH 5000 Battery, GE MAC500 Battery, GE MAC-1000 Battery, GE MAC 1100 Battery, GE MAC 1200 Battery, GE PRO 1000 Battery, GE PRO 1006 Battery, GE PRO 1008 Battery, GE PRO 1009 Battery, GE SCP 915 Battery.

•Provide easy access to your patients - The sleek design lets you easily access your patients while keeping them warm and content.

•Give you more room to work - The Panda Warmer’s compact size allows more room for you and your patient’s family to interact with baby.

•Be simple and easy to use - Features such as the hands-free alarm silence, a full-color display, and integrated scale make your job easier and help you provide better care to your patients.

EIZO 2MP Color Monitor MX215-BK

Welcome to a Biomedical Battery specialist of the Nihon Kohden Battery

Diagnostic Precision with DICOM Part 14 Factory Adjustment

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tone on the production line to produce a monitor compliant with DICOM Part 14.

Environmentally-Friendly LED Backlight

High Contrast Ratio

The high contrast ratio of 1500:1 allows the RadiForce MX215 to provide users with the high level of image quality and detail essential for viewing medical images in clinical environments.

Quick Brightness Stabilization for Instant Viewing

At startup or upon wakeup, the EIZO patented drift correction function quickly stabilizes the brightness level. In addition, a sensor measures the backlight brightness and counteracts brightness fluctuations caused by ambient temperature and the passage of time.

Presence Sensor for Power Savings

The presence sensor prompts the monitor to switch to power save mode when it detects the user is away from the monitor, and then resumes normal operation when the user returns.

Customer Assurance with Medical Standards

EIZO monitors meet the strictest medical, safety, and EMC emission standards. The RadiForce MX215 has obtained FDA 510(k) clearance for general radiography.

Thursday, 12 October 2017

Nihon Kohden NTX ZM-540/541P

Welcome to a Biomedical Battery specialist of the Nihon Kohden Battery

Allows for monitoring of up to eight vectors of ECG, respiration, continuous SpO2 and NIBP at the Central Monitor. NTX is designed to provide hospitals with more flexible monitoring on higher-acuity patients. Ergonomically designed to provide patient comfort and mobility, it bridges the gap between a traditional bedside monitor and an ambulatory transmitter.

The NTX with battery like Nihon Kohden ECG-1350 Battery, Nihon Kohden ECG-1400 Battery, Nihon Kohden ECG-1450 Battery, Nihon Kohden ECG-1500 Battery, Nihon Kohden ECG-6151 Battery, Nihon Kohden ECG-6353 Battery, Nihon Kohden ECG-6511 Battery, Nihon Kohden ECG-6551 Battery, Nihon Kohden ECG-6951 Battery, Nihon Kohden ECG-7100 Battery, Nihon Kohden ECG-8110P Battery, Nihon Kohden ECG-8420 Battery allows hospitals to safely monitor higher-acuity patients while maintaining the flexibility, comfort and mobility associated with the ambulatory patient. Integrated 2.2" color screen displays continuous real-time waveform and vital signs, and provides data review with 10 minutes of full disclosure waveforms and 10 minutes of vital signs data. The display also indicates lead status, battery status and pulse strength. The NTX transmitter operates in the protected WMTS frequency band and provides economical operation through the use of three alkaline "AA" batteries.

Product Features
.Full five-year parts and labor warranty
.Transmitters operate for up to three days using two or three “AA” alkaline batteries
.Low-battery warning sound and indicator lamp on each transmitter
.Call button can activate recorder and nurse call at central monitor (ZM-520/521PA and ZM-530/530PA only)
.Can use either a three-electrode (for single-vector ECG monitoring) or six-electrode (for eight-vector ECG monitoring) patient cable
.All transmitters monitor ECG and impedance respiration
.Lead-off indicators on each transmitter indicate which lead requires attention
.Automatic data integration to your electronic charting system using the CGS-9002 HL7 Gateway System

GF-210RA Multi-Gas Unit

Welcome to a Biomedical Battery specialist of the Nihon Kohden Battery

The GF-210RA Multi-Gas Unit connects to our BSM-6000 and BSM-9000 series monitors to provide a complete anesthesia monitoring solution.

Quick access windows display five waveforms (O2, CO2, N2O and two agents) with easy-to-view numerical data color-coded to match each waveform; comprehensive graphic trends of all parameters; a tabular data list that gives you minute-by-minute values of all anesthetic agents, gases and vital signs; and a user-selectable alarm for all parameters.

Product Features
.Automatic identification of five anesthetic agents
.Displays inspired and expired O2, CO2, N2O and two agents
.Quick warm up
.Adult and neonatal anesthesia monitoring
.Automatic self zero calibration
.User-friendly touchscreen operation

Wednesday, 11 October 2017

Nihon Kohden 1550A ECG Stress System

Welcome to a Biomedical Battery specialist of the Nihon Kohden Battery

•Swivel screen: 12.1 inch touch panel TFT LCD with swivel screen lets you change the screen angle to the best viewing position.
•Same size display image and printout: The screen display and waveforms are the same size as the printout. Also, the display has grid lies just like the recording paper.
•With battery like Nihon Kohden BSM-2300 Battery, Nihon Kohden BSM-2301A Battery, Nihon Kohden BSM-2351A Battery, Nihon Kohden BSM-2354A Battery, Nihon Kohden TEC-5521 Battery, Nihon Kohden TEC-5531 Battery, Nihon Kohden ECG-1530 Battery, Nihon Kohden ECG-1250A Battery, Nihon Kohden ECG-1250C Battery, Nihon Kohden ECG-1250P Battery
•Large 5 minute memory: The most recent five minutes of all lead ECG waveforms can be stored in memory. This increases the chance to record important data. To save data, you can select, analyze and print just the necessary region from 5 minute full disclosure.
•Serial comparison: Average waveforms in the latest 5 exams can be compared in the same screen. You can know the changes in time-series basis.
•Communication capability: Approximately 400 patients x 10 seconds of 12 lead ECG wave and patient information can be stored. Approximately 2,500 patients x 10 seconds of 12 lead ECG wave and patient information can be stored on a QM-040V flash disk card. Stored data can be transferred to PC via QM-040V or LAN/ Wireless LAN interface with optional QB-903E ECG viewer software.
•Built-in recorder or Paperless model: ECG-1500K (paperless model), ECG-1550K

Features:
•Touch screen user interface
•User defined protocols
•Accomodates Adenosine pharmacologic protocol
•Internal memory and expanded memory option
•Blood pressure entry
•Step (stage) print out
•LAN and wireless LAN capable
•USB communication interface
•Compact flash card storageAC
•Bar coding
•Includes resting interpretive ECG
•A/C and internal rechargeable battery operation
•Optional cart and cable arm
•Optional treadmill
•Optional bicycle ergometer
•Optional PC database management software
•Optional 15-lead resting ECG

Mindray A3 Anesthesia Machine

Welcome to a Biomedical Battery specialist of the Mindray Battery

Today’s anesthesia professionals demand intuitive ways to deliver the technology that can provide better patient care. With a focus on key ventilation modes, a large easy to see display, touchscreen control, and by eliminating menus, trim knobs and dedicated buttons, the A3 with battery such as Mindray 2ICR19/65 Battery, Mindray LI12I001A Battery, Mindray T1 Battery, Mindray T6 Battery, Mindray BeneHeart D6 Battery, Mindray WATO EX-20 Battery, Mindray WATO EX-60 Battery, Mindray WATO EX-65 Battery, Mindray WATO EX-50 Battery, Edan TWSLB-009 Battery, Guoteng GF9000 Battery, Guoteng GT9000 Battery promotes simple utilization of its key ventilation features. Experience the convergence of value and performance.

Key Features
•Volume Control Ventilation (VCV)
•Pressure Control Ventilation (PCV)
•Pressure Support (PS) ventilation
•Synchronized Intermittent Mandatory Ventilation with volume control (SIMV-VC)
•Manual/spontaneous breathing mode with respiratory monitoring capability
•15″ touchscreen user interface
•Breathing System maintained near 35° C and virtually eliminates internal condensation
•Auxiliary Oxygen/Air flow meters deliver blended gas, reducing combustible O2 concentration
•Automatic compliance and fresh gas compensation maintain accurate tidal volumes with a wide range of fresh gas flows and breathing circuits
•Economical single container absorber reduces compressible volume and accepts non-proprietary prepackaged and loose fill absorbent
•Deck lighting with adjustable brightness
•Individual wheel brakes on all four casters

Tuesday, 10 October 2017

Panametrics GS868 Ultrasonic Flow Meter

Welcome to a Biomedical Battery specialist of the Panametrics Battery

The GE Panametrics DigitalFlow GS868 ultrasonic flowmeter is designed to measure the mass flow rate of saturated or superheated steam. It offers a unique combination of no pressure drop, wide rangeability, ease of installation, low maintenance and high accuracy in a full-feature flowmeter package.

The GE Panametrics DigitalFlow GS868 flowmeter system consists of one or two pairs of transducers, preamplifiers and an electronics console. The compact ultrasonic transducers are installed in the pipe or duct, one upstream of the other and up to 500 feet from the console. The transducers send and receive ultrasonic pulses through the steam. The meter with battery such as Panametrics Magna-Mike 8500 Battery, Panametrics KR1800SCE Battery, NetTEST Battery, Tektronix REI DPA-7000 Battery, Tektronix TPS2000B Battery, Tektronix TPS2012B Battery, Tektronix TPS2014B Battery, Tektronix TPS2024B Battery, TSI TSI8532 Battery, TSI EP-03750 Battery, YUT Battery, YUT DR-202S Battery measures the difference between the upstream and downstream transit times, and uses digital signal processing, advanced signal processing and correlation detection to calculate velocity and volumetric flow rate. Mass flow is calculated from the input of temperature and pressure and the built-in steam tables

Since the DigitalFlow GS868's transducers do not obstruct the flow, they generally do not cause any pressure drop. The DigitalFlow GS868 has no parts that foul or collect debris, and no moving parts to wear out. As a result, it requires no lubrication, cleaning or other routine maintenance.

With its broad range of measurement velocities and its ability to measure flow in any pipe from small to very large, one DigitalFlow GS868 meter does the job of several conventional meters. It handles pipes from 2 to 48 inches in diameter and velocities from 0.1 to 150 ft/s―in either direction―in saturated or superheated steam.

In addition to the standard single-channel model, an optional two-channel model provides enhanced accuracy when measuring two paths on a single pipe. It can also be used to measure a single path on two pipes.

In addition to velocity, volumetric and mass flow data, the DigitalFlow GS868 also provides diagnostic parameters such as transit times and sound speed, to aid in setup and troubleshooting. Any of this data can be easily printed, logged, sent to an analog or digital output, or read in numeric or graphic format on the dual window display.

The DigitalFlow GS868 flowmeter makes it easy to send the data where it needs to go, through the standard digital output, standard or optional analog outputs, or optional alarms. All outputs are conveniently set up and calibrated from the keypad or from a computer using PanaView™ PC-interface software.

Edan BITE2 Battery Impedance Testers

Welcome to a Biomedical Battery specialist of the Edan Battery

The BITE2 and BITE2P Battery Impedance Test Equipment determine the condition of lead-acid and nickel-cadmium cells up to 7000 Ah. An advanced feature set has been developed that includes Pass/Warning/Fail calculations based on a user entered baseline value, advanced printing functions. The case of the BITE2P with battery such as Edan IM9A Battery, Edan M8 Battery, Edan M3 Battery, YUT YUT2600 Battery,YUT YUT2620 Battery, YUT YUT2820 Battery, BIS 185-0152 Battery, BIS 186-0208 Battery, BIS Vista Battery, BIS VTI 14564 Battery, Contec CMS6000 Battery, Contec CMS8000 Battery consists of both the transmitter and a carrying case for all of the standard accessories and some of the optional accessories, in an all-in-one unit. The BITE2 and its accessories fit into a sturdy canvas case with a shoulder strap.

The instruments work by applying a test signal across the battery string while on-line, then calculates impedance based on simultaneous measurements of current and resulting voltage drop of each cell/jar. They also measure dc voltage and interconnection (strap) resistance to help determine the overall condition of the entire battery string's electrical path from terminal plate to terminal plate.

The BITE2 and BITE2P receiver stores the readings in its internal memory. These measurements, along with other maintenance data such as ambient and pilot cell temperatures and ac ripple current, assist in determining the overall condition of battery systems. Both have the ability to download to a PC for data interpretation and to PowerDB, Edan's battery database management software. Additionally, the BITE2P has a built-in printer to review the active test and also to leave a hard copy record at the site.
Applications for the Edan BITE2 / BITE2P battery impedence tester:

•Electrical power generation plants
•Substations: utility, railroad, industrial
•Telecommunications facilities: CO, Wireline, Wireless, MTSO
•UPS systems
•Railroad: Signals and Communications, substation
•Aircraft power supplies
•Marine, military

Fluke 983 Particle Counter Air Quality Meter

Welcome to a Biomedical Battery specialist of the Acterna Battery

The new Fluke 983 Particle Counter is the preferred choice for HVAC and IAQ professionals. From filter testing to IAQ investigations, the Fluke 983 with battery like Fluke BP7235 Battery, Fluke 700 Calibrator Battery, Fluke 740 Calibrator Battery, Fluke 744 Calibrator Battery, Fluke DSP-4000PL Battery, Fluke DSP-4000 Battery, LI201SX Battery, LI201SX-48A Battery, JDSU GC724A Battery, JDSU JD723A Battery, ResMed Elisee 350 Battery, ResMed Elisee 150 Battery is the portable solution for determining airborne particle concentrations. Use the Fluke 983 to immediately respond to occupant complaints, or as part of a comprehensive preventive maintenance program.

With the Fluke 983, you can:

Measure filter efficiency
Monitor industrial cleanrooms
Pre-screen indoor air quality and confidently work with IAQ specialists
Locate particle sources for remediation
Report the effectiveness of repairs to customers
Drive additional business by demonstrating the need for maintenance and repair

With expanded data logging and six-channel particle size display, the Fluke 983 allows users to run more tests quickly, with less time spent cycling through screens to obtain the data. The Fluke 983 is lightweight and easy to use in any position, with a comfortable hand strap and rugged rubber holster.

Assess air quality more easily and accurately

The Fluke 983 Particle Counter simultaneously measures and displays six channels of particle size distribution, temperature and humidity. This compact, lightweight, self-contained tool allows for one-handed operation. The Fluke 983 maintains its accuracy when used in any position. The 8 hour rechargeable battery together with a large 5000 sample record capacity allows for uninterupted performance during air quality surveys. The Fluke 983 is the ideal tool for determining size distribution of airborne particles or tracking down a particle source.

Simultaneously measure and display 6 channel of particle sizes, temperature and humidity
Measure particle size down to 0.3 µm
Selectable sample time, count data, programmable delay
Store 5000 records of date, time, counts, relative humidity, temperature, sample volumes, alarms and location label
Upload stored data to a PC with included software
Compact, self-contained package allows for one-handed operation
Intuitive, easy to use user interface
Always ready to run, with no fluids to refill
Backlit LCD for use in any lighting condition
8 hour rechargeable NiMH battery
Protective holster

Acterna MTS 8000 Transport Module

Welcome to a Biomedical Battery specialist of the Acterna Battery

As service providers expand their offerings into new data and wavelength services, test requirements are also expanding beyond traditional SONET and T-Carrier technologies into Data and Optical layer technologies. Service providers are now responsible for installing and maintaining new network elements and service types that were not present in legacy networks.

The T-BERD/MTS 8000 (TB/MTS 8000) Transport module addresses these trends by providing the necessary test functionality to support all of these services in one integrated module. Weighing less than 15 pounds and operating on battery power for up to two hours at 10 Gb/s line rates, the TB/MTS 8000 with battery such as JDSU GPDR204 Battery, JDSU LI204SX Battery, JDSU MTS-6000 Battery, JDSU LI204SX-60A Battery, JDSU LI204SX-66A Battery, JDSU LI204SX-60 Battery, HP VA7100 Battery, HP VA7110 Battery, HP VA7400 Battery, HP VA7410 Battery, Biocare ECG-9803 Battery is conveniently sized and designed for field test applications.

The TB/MTS 8000 Transport module’s Ethernet configuration allows for Ethernet and IP test capabilities from all Ethernet interfaces – 10/100/1000 copper, optical Gigabit Ethernet (GigE), and 10GigE LAN-Phy and WAN-Phy. Key test applications of the TB/MTS 8000 include connectivity, throughput, and quality of service (QoS) testing for emerging IP networks. The TB/MTS 8000 also provides RFC 2544 testing for verification of Ethernet and IP conformance to service level agreements (SLAs).

The TB/MTS 8000 features a full dual-port capability for 10/100/1000 copper and optical GigE interfaces – with two transmitters (TX) and two receivers (RX) – allowing for the simultaneous testing of two Ethernet/VLAN or IP circuits. These circuits may be provisioned for two fully independent customers, or they may represent two routes in a single network.

The dual-port capability of the TB/MTS 8000 Transport module enables field technicians to perform three important types of testing during turn-up and first-line of maintenance:
– Simultaneous Circuit Testing: Testing of two
independent circuits concurrently – Network Element Wrap Testing: Testing an element from the client to the network side
– In-Service Troubleshooting: Monitoring from two different directions on the circuit

Sunday, 8 October 2017

Agilent N6700B Modular Power System

Welcome to a Biomedical Battery specialist of the Agilent Battery

The Keysight N6700B is a 400 W 1U high, 4-slot modular power system mainframe that accepts from 1 to 4 N6700 series DC power modules in any combination. Modules are ordered separately. The N6700B offers GPIB, LAN, and USB, interfaces standard, and LXI compliance. Select from more than 20 different DC power modules, ranging in capability from basic to high precision, and in power from 20 - 300 W.

Maximum Total Output Power (= Sum of Total Module Output Power) with battery like Agilent N9330 Battery, Agilent N9330B Battery, Agilent N9340B Battery, Agilent N9330B-BAT Battery, Agilent N9330B-BCG Battery, Agilent TY 3CGR18650D-2 Battery, IAI AV6413 Battery, Unipower B11588 Battery, Alpha Source AS30139 Battery, Interstate Batteries AMED2160, Interstate Batteries ACAM0300, Alpha Source AS36011 Battery

•400 W when operating from 100 - 240 VAC input

AC Input

•Nominal Input Ratings: 100 VAC - 240 VAC; 50/60/400 Hz
•Input Range: 86 VAC - 264 VAC
•Power Consumption: 1000 VA typical
•Fuse Internal fuse (not customer accessible)

Protection Response Characteristics

•INH input: 5 µs from receipt of inhibit to start of shutdown
•Fault on coupled outputs: < 10 µs (from receipt of fault to start of shutdown)

Respironics Trilogy 100 Ventilator

Welcome to a Biomedical Battery specialist of the CareFusion Pulmonetic Battery

Trilogy 100 portable life-support ventilators are designed for versatility. They can be used in the home and alternative care sites, and provide non-invasive as well as invasive ventilator support with added sensitivity for a wide range of adult and pediatric patients. The Trilogy 100 with battery such as HP 1724A Battery, HP 1922B Battery, HP M1724XE Battery, Smiths WZ-50F6 Battery, Smiths WZF-50F2 Battery, Kangaroo 321 Battery, Smef SC-5 Battery, Respironics 8-500016-00 Battery, Respironics BiPAP Focus Battery, ResMed BAT013514 Battery, CareFusion Pulmonetic LTV1000 Battery, CareFusion Pulmonetic LTV950 Battery offers two circuit types: a passive circuit with exhalation port or an active circuit with an exhalation valve and proximal pressure line.

The Trilogy 100 can be used with a SD card that stores all necessary ventilation data. The data is monitored by DirectView software, which helps you manage patient ventilation therapy and assist with identifying the need for any adjustments. This ventilation data can be exported for supplementary analysis in a number of applications.

The ventilator’s many compatible accessories, including multiple disposable circuits, with advanced technology and software, enhance patient ventilation as well as maintain effective treatment and improve patient care.

Features

When configured with the passive circuit, the Trilogy 100 provides the following Respironics well known technologies: Advanced leak compensation in invasive and non-invasive ventilation for pressure modes, as well as volume modes.
Auto-TRAK algorithm providing automatic trigger and cycle thresholds to maintain optimum sensitivity eliminating the need for adjustments.
AVAPS (Average Volume Assured Pressure Support) hybrid ventilation in pressure modes for invasive and non-invasive modalities.

Intuitive interface combines ease of use with access to high levels of versatility and performance during hospital titration or home use.
Offers up to 6 to 8 hours battery capacity for continuous use.
72 hours of raw data to monitor a patient's breath-by-breath waveform.
Daily details, displaying the patient's therapy for the past 30 days.
Trend overviews of the past 12 months displaying: pressure, breath rate, percentage of triggered breaths, peak inspiratory patient flow, estimated exhaled tidal volume, leak, Ti/Ttot and minute ventilation.